The SMART S-2435 is a high-functionality GLONASS/GPS vehicle GPS tracker engineered for demanding telematics deployments and is Plaspy compatible out of the box. With built‑in high-sensitivity GLONASS/GPS and GSM antennas, dual SIM 2G modem connectivity, an internal rechargeable battery and extensive I/O, the S-2435 delivers reliable location and telemetry data even in harsh vehicle electrical environments.
The S-2435 pairs with Plaspy to provide real-time tracking, robust telemetry and flexible integration points for fleet management, cargo monitoring and advanced vehicle control. Its Bluetooth 4.0 support and rich serial/CAN interfaces make it straightforward to connect external sensors and implement workflows for anti-theft response, fuel monitoring and remote actuation when combined with Plaspy’s platform rules and alerts.
Key Highlights
- Plaspy compatible for fast integration into existing real-time tracking dashboards and alerts.
- High-sensitivity GLONASS/GPS receiver and internal GSM antennas for dependable GPS tracker performance in urban and remote areas.
- Dual SIM 2G modem ensures carrier redundancy and continuous cellular connectivity.
- Internal 800 mAh rechargeable battery maintains operation through power interruptions—critical for anti-theft tracking and incident capture.
- Extensive I/O (universal inputs, configurable outputs, RS-232/RS-485, CAN, 1-Wire) enables wide telemetry and device control use cases.
- Bluetooth 4.0 for local configuration and connection to Bluetooth sensors for temperature, door state or proximity monitoring.
- Robust electrical protection (up to 500 V power protection, 350 V input line protection) built for tough vehicle electrical systems.
- Supports MODBUS protocol and remote firmware updates through the vendor DRC remote management system for easy maintenance.
How It Works with Plaspy
The SMART S-2435 feeds location and telemetry into Plaspy using standard telematics protocols and its cellular uplink. Plaspy ingests the device’s GNSS position, timestamps and sensor telemetry to provide live maps, historical playback, alerts and reports. Configuration and rule-based actions in Plaspy allow fleets to convert raw data from the S-2435 into operational insights and automated responses.
- Real-time location and telemetry updates delivered to Plaspy over the device’s 2G cellular link.
- Vehicle inputs and outputs exposed via Plaspy for event-driven alerts (e.g., sensor triggers or output actuation).
- Fuel monitoring and other telemetry through connected sensors (1-Wire, CAN, RS-485, MODBUS) and processed in Plaspy reports.
- Remote immobilizer or control workflows achievable through configurable outputs when integrated with vehicle control hardware.
- Bluetooth sensors for local data capture and configuration; sensor data can be bridged into Plaspy for telemetry and alerting.
Technical Overview
| Connectivity | 2G GSM modem (dual SIM), cellular uplink for telemetry and position reporting |
|---|---|
| Bands | Not specified in provided documentation |
| Power & Battery | Internal rechargeable 800 mAh battery for backup operation; power protection up to 500 V and input line protection up to 350 V |
| Interfaces | 3 universal inputs, 2 configurable outputs (control lines), RS-232, RS-485, CAN bus, 1-Wire |
| GNSS | High-sensitivity GLONASS/GPS receiver with built-in antennas |
| Bluetooth | Bluetooth 4.0 for local communication and Bluetooth sensors |
| Protocols & Integration | MODBUS support; vendor DRC remote management for firmware updates; NTC Configurator for device setup |
| Form Factor | Compact vehicle tracker designed for integration with commercial and industrial vehicles |
Use Cases
- Fleet management: real-time tracking, route replay and vehicle telemetry collection for buses, vans and light trucks.
- Cargo tracking and security: continuous location monitoring and backup battery operation to maintain tracking during tamper or power-cut events for anti-theft workflows.
- Advanced vehicle monitoring: integrate CAN bus and serial sensors to capture engine parameters, fault codes and operational telemetry for preventive maintenance.
- Industrial telemetry and MODBUS integration: connect industrial sensors or controllers via RS-485/MODBUS for remote monitoring of mobile equipment.
- Sensor-based monitoring with Bluetooth sensors: local temperature, door or proximity sensors connected via Bluetooth for cold-chain or door-status monitoring.
Why Choose This Tracker with Plaspy
The SMART S-2435 is a purpose-built GPS tracker for organizations that need a flexible, Plaspy compatible device to support complex telematics projects. Its combination of high-sensitivity GNSS, dual SIM cellular redundancy, a backup battery for anti-theft resilience, and comprehensive I/O and protocol support makes it a reliable platform for fleet management and telemetry workflows. Use Plaspy to centralize real-time tracking, automate alerts and run reports while leveraging the S-2435’s interfaces to integrate fuel monitoring, ignition/immobilizer control logic and external sensors. Firmware management via the vendor’s DRC system and configuration tools like NTC Configurator reduce maintenance overhead and speed deployments.
Set Up СМАРТ S-2435
Use with a tracker
-
Set the Operator APN
CountryCarrierAPNinternet.comcel.com.coUserCOMCELWEBPasswordCOMCELWEB
- Check your tracker clock setup is set UTC-0 or GMT. (The most trackers come from the factory on UTC.)
- For most devices you should use IMEI (International Mobile Equipment Identity) number as unique identifier. However, some devices have vendor specific unique identifier, for example TK-103 devices use 11-digit identifier.
-
Set Up the IP and port on your tracker: (automatic detect tracker's protocol.)
Server d.plaspy.com IP 54.85.159.138 Port 8888 - Add on your Account on devices with the IMEI or unique ID.
